10mm x 80mm - 50pc Flush Sleeve Anchors Zinc Plated
*may not be available
for immediate pickup
Zinc Flush Sleeve Anchors are used to anchor into hard and lightweight solid masonry materials inluding concrete, brick and blocks. The anchor is inserted into a pre-drilled hole and when the head is turned, the end of the anchor is pulled to expand and secure itself. The hexagon head sits flush and the zinc yellow coating is suitable for indoor use. Please see table below for grip range, drill size and hole depth.
Drilling and Fixing Information for Sleeve Anchor - Flush - Zinc Yellow | |||
Size | Drill Size (mm) | Fasten Material (mm) | Min. Hole Depth (mm) |
8mm X 45 | 8 | 10 | 35 |
8mm X 70 | 8 | 35 | 35 |
8mm X 90 | 8 | 55 | 35 |
10mm X 45 | 10 | 5 | 40 |
10mm X 55 | 10 | 15 | 40 |
10mm X 65 | 10 | 25 | 40 |
10mm X 80 | 10 | 40 | 40 |
10mm X 100 | 10 | 60 | 40 |
12mm X 65 | 12 | 15 | 50 |
12mm X 80 | 12 | 30 | 50 |
12mm X 110 | 12 | 55 | 50 |
16mm X 75 | 16 | 15 | 60 |
16mm X 110 | 16 | 50 | 60 |
Product Type | HOBSON OTHER AND SPECIAL ORDER |
---|---|
Custom 3 - Location Bin | SPEC- ORD |
Pack Qty | 50 |
Colour | Special Order |
Material/ Coating | Zinc Plated (ZP) |
Gauge / Diameter | 10mm |
Length | 80mm |
Drive | Hex |
Drill Size | 10mm |
Special Order | Shipped Next Day |