8mm x 65mm - 100pc Hex Sleeve Anchors Stainless Steel 316 Grade
Hex Sleeve Anchor M8 X 65mm - 50pc
$78.85
In Stock
8.0mm
65mm
50PC
8mm QCode: 162054
SKU
SAHA408065-50
Stainless Hex Sleeve Anchors are used to anchor into hard and lightweight solid masonry materials including concrete, brick and blocks. The anchor is inserted into a pre-drilled hole and when the head is turned, the end of the anchor is pulled to expand and secure itself. The stainless steel is suitable for marine and food areas. Please see table below for grip range, drill size and hole depth.
| Drilling and Fixing Information for Sleve Anchor - Hex - Stainless | |||
| Size | Drill Size (mm) | Fasten Material (mm) | Min. Hole Depth (mm) |
| 6.5mm X 36 | 6.5 | 5 | 30 |
| 6.5mm X 56 | 6.5 | 25 | 30 |
| 6.5mm X 75 | 6.5 | 45 | 30 |
| 8mm X 40 | 8 | 5 | 35 |
| 8mm X 65 | 8 | 30 | 35 |
| 8mm X 85 | 8 | 50 | 35 |
| 10mm X 40 | 10 | 60 | 34 |
| 10mm X 50 | 10 | 10 | 40 |
| 10mm X 60 | 10 | 20 | 40 |
| 10mm X 77 | 10 | 35 | 40 |
| 10mm X 97 | 10 | 55 | 40 |
| 12mm X 60 | 12 | 10 | 50 |
| 12mm X 75 | 12 | 25 | 50 |
| 12mm X 99 | 12 | 50 | 50 |
| Product Type | ANCHORS - SLEEVE ANCHOR |
|---|---|
| Custom 3 - Location Bin | O1B4-WLE2.2 |
| Pack Qty | 50 |
| Material/ Coating | Stainless Steel 316 Grade |
| Gauge / Diameter | 8.0mm |
| Length | 65mm |
| Head | Hex Head |
| Drive | Hex |
| Drill Size | 8mm |
Supplier SKUs: SANA4M8X65 SANA4M8X65 9312862002452 SANA4M8X65 SANA4M8X65 9312862002452
