10mm x 75mm - 50pc Hex Sleeve Anchors Stainless Steel 316 Grade
Hex Sleeve Anchor M10 X 75mm - 50pc
$129.36
In Stock
10mm
75mm
50PC
10mm QCode: 162057
SKU
SAHA410075-50
Stainless Hex Sleeve Anchors are used to anchor into hard and lightweight solid masonry materials including concrete, brick and blocks. The anchor is inserted into a pre-drilled hole and when the head is turned, the end of the anchor is pulled to expand and secure itself. The stainless steel is suitable for marine and food areas. Please see table below for grip range, drill size and hole depth.
| Drilling and Fixing Information for Sleve Anchor - Hex - Stainless | |||
| Size | Drill Size (mm) | Fasten Material (mm) | Min. Hole Depth (mm) |
| 6.5mm X 36 | 6.5 | 5 | 30 |
| 6.5mm X 56 | 6.5 | 25 | 30 |
| 6.5mm X 75 | 6.5 | 45 | 30 |
| 8mm X 40 | 8 | 5 | 35 |
| 8mm X 65 | 8 | 30 | 35 |
| 8mm X 85 | 8 | 50 | 35 |
| 10mm X 40 | 10 | 60 | 34 |
| 10mm X 50 | 10 | 10 | 40 |
| 10mm X 60 | 10 | 20 | 40 |
| 10mm X 77 | 10 | 35 | 40 |
| 10mm X 97 | 10 | 55 | 40 |
| 12mm X 60 | 12 | 10 | 50 |
| 12mm X 75 | 12 | 25 | 50 |
| 12mm X 99 | 12 | 50 | 50 |
| Product Type | ANCHORS - SLEEVE ANCHOR |
|---|---|
| Custom 3 - Location Bin | WH6.1 |
| Pack Qty | 50 |
| Material/ Coating | Stainless Steel 316 Grade |
| Gauge / Diameter | 10mm |
| Length | 75mm |
| Head | Hex Head |
| Drive | Hex |
| Drill Size | 10mm |
Supplier SKUs: SANA4M10X75 SANA4M10X75 SANA4M10X75 SANA4M10X75
