Galvanised Hex Sleeve Anchors
-
40mm
100PC
8mm![]()
- 60mm50PC8mm
![]()
- 80mm50PC8mm
![]()
- 40mm50PC10mm
![]()
- 50mm50PC10mm
![]()
- 60mm50PC10mm
![]()
- 75mm50PC10mm
![]()
- 100mm25PC10mm
![]()
- 125mm50PC10mm
![]()
- 60mm25PC12mm
![]()
- 80mm25PC12mm
![]()
- 100mm20PC12mm
![]()
- 120mm20PC12mm
![]()
- 65mm20PC16mm
![]()
- 105mm10PC16mm
![]()
- 145mm10PC16mm
![]()
- 160mm5PC20mm
![]()
- 75mm10PC20mm
![]()
- 100mm5PC20mm
![]()
Product Filter
Galvanised Hex Sleeve Anchors
Galvanised Hex Sleeve Anchors are used to anchor into hard and lightweight solid masonry materials inluding concrete, brick and blocks.
The anchor is inserted into a pre-drilled hole and when the head is turned, the end of the anchor is pulled to expand and secure itself.
The Galvanised coating is suitable for most outdoor applications.
Please see table below for grip range, drill size and hole depth.
| Drilling and Fixing Information for Sleve Anchor - Hex - Galvanised | |||
| Size | Drill Size (mm) | Fasten Material (mm) | Min. Hole Depth (mm) |
| 8mm X 40 | 8 | 5 | 35 |
| 8mm X 65 | 8 | 30 | 35 |
| 8mm X 85 | 8 | 50 | 35 |
| 10mm X 40 | 10 | 4 | 36 |
| 10mm X 50 | 10 | 10 | 40 |
| 10mm X 60 | 10 | 20 | 40 |
| 10mm X 77 | 10 | 35 | 40 |
| 10mm X 97 | 10 | 55 | 40 |
| 10mm X 125 | 10 | 80 | 40 |
| 12mm X 60 | 12 | 10 | 50 |
| 12mm X 75 | 12 | 25 | 50 |
| 12mm X 99 | 12 | 50 | 50 |
| 12mm X 129 | 12 | 80 | 50 |
| 16mm X 65 | 16 | 10 | 55 |
| 16mm X 111 | 16 | 55 | 55 |
| 16mm X 147 | 16 | 90 | 55 |
| 20mm X 75 | 20 | 15 | 60 |
| 20mm X 107 | 20 | 45 | 60 |
| 20mm X 151 | 20 | 90 | 60 |
