20mm x 75mm - 10pc Hex Sleeve Anchors Galvanised
$30.75
In Stock
20mm
75mm
10PC
20mm QCode: 160880
SKU
SAHG20075-10
Galvanised Hex Sleeve Anchors are used to anchor into hard and lightweight solid masonry materials inluding concrete, brick and blocks. The anchor is inserted into a pre-drilled hole and when the head is turned, the end of the anchor is pulled to expand and secure itself. The Galvanised coating is suitable for most outdoor applications. Please see table below for grip range, drill size and hole depth.
| Drilling and Fixing Information for Sleve Anchor - Hex - Galvanised | |||
| Size | Drill Size (mm) | Fasten Material (mm) | Min. Hole Depth (mm) |
| 8mm X 40 | 8 | 5 | 35 |
| 8mm X 65 | 8 | 30 | 35 |
| 8mm X 85 | 8 | 50 | 35 |
| 10mm X 40 | 10 | 4 | 36 |
| 10mm X 50 | 10 | 10 | 40 |
| 10mm X 60 | 10 | 20 | 40 |
| 10mm X 77 | 10 | 35 | 40 |
| 10mm X 97 | 10 | 55 | 40 |
| 10mm X 125 | 10 | 80 | 40 |
| 12mm X 60 | 12 | 10 | 50 |
| 12mm X 75 | 12 | 25 | 50 |
| 12mm X 99 | 12 | 50 | 50 |
| 12mm X 129 | 12 | 80 | 50 |
| 16mm X 65 | 16 | 10 | 55 |
| 16mm X 111 | 16 | 55 | 55 |
| 16mm X 147 | 16 | 90 | 55 |
| 20mm X 75 | 20 | 15 | 60 |
| 20mm X 107 | 20 | 45 | 60 |
| 20mm X 151 | 20 | 90 | 60 |
| Product Type | ANCHORS - SLEEVE ANCHOR |
|---|---|
| Custom 3 - Location Bin | WH6.1 |
| Pack Qty | 10 |
| Material/ Coating | Galvanised |
| Gauge / Diameter | 20mm |
| Length | 75mm |
| Head | Hex Head |
| Drive | Hex |
| Drill Size | 20mm |
Supplier SKUs: MTBMSGM200075 MTBMSGM200075 MTBMSGM200075 9314818500289
