10mm x 75mm - 50pc Hex Sleeve Anchors Galvanised
$31.94
In Stock
10mm
75mm
50PC
10mm
QCode: 162068
SKU
SAHG10075-50
Galvanised Hex Sleeve Anchors are used to anchor into hard and lightweight solid masonry materials inluding concrete, brick and blocks. The anchor is inserted into a pre-drilled hole and when the head is turned, the end of the anchor is pulled to expand and secure itself. The Galvanised coating is suitable for most outdoor applications. Please see table below for grip range, drill size and hole depth.
Drilling and Fixing Information for Sleve Anchor - Hex - Galvanised | |||
Size | Drill Size (mm) | Fasten Material (mm) | Min. Hole Depth (mm) |
8mm X 40 | 8 | 5 | 35 |
8mm X 65 | 8 | 30 | 35 |
8mm X 85 | 8 | 50 | 35 |
10mm X 40 | 10 | 4 | 36 |
10mm X 50 | 10 | 10 | 40 |
10mm X 60 | 10 | 20 | 40 |
10mm X 75 | 10 | 35 | 40 |
10mm X 100 | 10 | 55 | 40 |
10mm X 125 | 10 | 80 | 40 |
12mm X 60 | 12 | 10 | 50 |
12mm X 75 | 12 | 25 | 50 |
12mm X 99 | 12 | 50 | 50 |
12mm X 129 | 12 | 80 | 50 |
16mm X 65 | 16 | 10 | 55 |
16mm X 111 | 16 | 55 | 55 |
16mm X 147 | 16 | 90 | 55 |
20mm X 75 | 20 | 15 | 60 |
20mm X 107 | 20 | 45 | 60 |
20mm X 151 | 20 | 90 | 60 |
Product Type | ANCHORS - SLEEVE ANCHOR |
---|---|
Custom 3 - Location Bin | WH6.1 |
Pack Qty | 50 |
Material/ Coating | Galvanised |
Gauge / Diameter | 10mm |
Length | 75mm |
Head | Hex Head |
Drive | Hex |
Drill Size | 10mm |
Supplier SKUs: MTBMSGM100075-50 MTBMSGM100075 9337357118593 MTBMSGM100075 9337357118593