Stainless Steel Swage Stud Terminal A4(316) M6 For 3.2mm Wire With Nuts And Dome Nuts

The Swage Stud Terminal M6 for 3.2mm wire with nuts and dome nuts is made of 316 grade Stainless Steel which is ideal to be used near the ocean or in Harsh Envorinmental Conditions.

Features

• For 3.2mm Wire
• Tensioned System
• 316 Grade Stainless Steel
• M6 Thread

The Stud terminals are the tensioners used in the Tensioned Wired System. The Wire is hydraulically swaged onto the terminal and stud goes through the hole in the hub which is secured by a Hex nut and Dome Nut on the otherside. Ideally the wire is supposed to be cut to such lenght that not more than 20mm of thread is left protuding from the other side of the hub.

Description

The Fastener Factory offers different styles when it comes to Wire Trellis Systems depending upon your application and requriements. Mainly they are divided into two categories, Tensioned Systems and Non Tensioned Systems. Both of these systems can be installed in various different arrangements and easily able to fix to Timber and Masonry/Concrete walls. The Fastener factory stocks all the fixings and tools for 3.2mm and 4.0mm wire trellis systems.

Tensioned Wire System is ideal if you are looking to train heavy or dense creepers like Grapevine, Orange Trumpet Creeper, Creeping Fig, Passionfruit, Banksia Rose Etc. You can ofcourse get the lighter vines climbing on these systems as well like Wisteria, Bambino Dwarf Bougainvillea, Star Jasmine Etc. They can be arranged in a Diamond or Square or any design you llike.

The Tensioned System is a quick and easy way of installing the wire on your Fence, Pergola, Deck or Verandah. The wire needs to be Hydraulically Swaged to the fittings with a 5 Tonne or 8 Tonne Hydraulic Swaging Tool. The main components of this system are The Stainless Steel Surface Mounted Hubs with a flat plate at the bottom. They comes in two lenghts 68mm and 122mm with an 8mm female thread at the bottom for the timber or Masonry fixing. 68mm one is mostly used for 3.2mm and 122mm for 4.0mm wire although they can be used for either wire size. The hubs screws into either Timber Double Threaded Screw M8 x 50mm or Wedge Anchor M8 x 50mm. The metal thread on the Stud Terminals with the wire swaged on them goes into the holes across the hub and are secured with a hex nut and a dome nut from the other side.

The Non Tensioned System is ideal for putting light weight vines and climbers. like Wisteria, Bambino Dwarf Bougainvillea, Star Jasmine Etc. Since this system doesnt have any tensioners so it makes it even easier to install as you do not need any crimping tool. Similar to the Tensioned System this can be arranged in a Diamond or Square or any design you like.

The Non Tensioned System includes the Hubs or Standoffs comes in two lengths 42mm and 100mm secured with a stainless steel self tapping screw 6g x 38mm for timber. It can be used on a concrete wall as well with a 8mm plug. You need to unscrew the grub screw on the hub and run the wire through the holes, pull it as tight as you can and tighten the grub screw on. Black wire ends are used to secure the wire ends and protects against frayed ends.