Stainless Flush Sleeve Anchors 8mm X 70mm - 50 pc
$164.56
available* Item may be warehoused offsite
*may not be available
for immediate pickup
SKU
MTH16PM080070

Stainless Flush Sleeve Anchors are used to anchor into hard and lightweight solid masonry materials inluding concrete, brick and blocks. The anchor is inserted into a pre-drilled hole and when the head is turned, the end of the anchor is pulled to expand and secure itself. The hexagon head sits flush and the stainless steel is suitable for marine and food areas. Please see table below for grip range, drill size and hole depth.
Drilling and Fixing Information for Sleve Anchor - Flush - Stainless | |||
Size | Drill Size (mm) | Fasten Material (mm) | Min. Hole Depth (mm) |
8mm X 45 | 8 | 10 | 35 |
8mm X 70 | 8 | 35 | 35 |
8mm X 90 | 8 | 55 | 35 |
10mm X 45 | 10 | 6 | 34 |
10mm X 60 | 10 | 20 | 40 |
10mm X 75 | 10 | 35 | 40 |
10mm X 95 | 10 | 55 | 40 |
12mm X 75 | 12 | 25 | 50 |
Material/ Coating | N/A |
---|---|
Metric Length | N/A |
Head Type | N/A |
Drive Type | N/A |
Pack Qty | N/A |
Thread x Pitch | N/A |
Write Your Own Review