Soudal Fill & Paint Gap Filler 300ml
Fill & Paint is a general purpose interior / exterior gap filler that remains flexible. Fill & Paint has a smooth finish with low shrinkage and has good adhesion to most common building materials including wood, MDF, particle board, plywood, fibre cement sheet, plasterboard, concrete, masonry including brick and block work, cement render, polystyrene foam, tiles, ceramics, aluminium. Over paintable in 20 mins. Water clean-up. Moisture resistant though protect from moisture when used externally.
Characteristics
Fill & Paint has many uses including: sealing around skirting boards, cornices, tiles (except showers), window frames, staircases, architraves, trims, wall & floorboards and coving. Sealing gaps and cracks in plastered wall and ceilings. See Technical Data Sheet and MSDS for more information.
Directions for use
- All surfaces must be clean, dry and free from dust, dirt, grease and loose materials.
- Cut the tip off the cartridge, screw on the nozzle and trim to the required angle for bead size.
- Apply at the temperatures between 5C and 35C
- Tool within 20 minutes of application.
- Clean up with water immediately after use.
- Store in cool and dry conditions between 5C and 25C
Limitations
It is the user's responsibility to determine the suitability of use. It is recommended that a sample test be undertaken before use. Do NOT when rain or frost is imminent. In damp, cold or humid conditions, curing time may be significantly extended.
Product Type | S&A FILLERS AND PUTTYS |
---|---|
Custom 3 - Location Bin | O1E11-WLJ8.0 |
Brand | Soudal |