M12 x 160mm - 10pc Chemical Stud Anchor Kit Chisel Point Galvanised Class 5.8

M12X160 - 10Pc Chem Stud Galv

$16.56

In Stock

10PC

14mm

QCode: 126816

SKU

CSCPG5.812160-10

Details

Item Details:

M12 Thread
160mm Long
Nut and Washer Included
Hot Dipped Galvanised
Class 5.8
Chisel Point
10 pc

Hobson Chemical Anchor Studs are single unit non expansion type fasteners that are used in pre-drilled holes. They comprise of a chisel point stud available in flat cut or external hexagon type head, a nut and washer. Fixing of the stud is achieved by inserting a suitable curing resin into the hole using a glass chemical capsule or injection type adhesive system. The stud is then inserted into the hole and rotated either by hammer drill for (glass capsule) or hand for (injection type) to allow for proper setting into the resin. Anchor can be loaded once appropriate curing time has been reached.

Features:

Good load capability
Non expanding type fastener
Resistant to vibration
Complete sealing of hole
Can be installed close to edge
Reduced spacing between anchors
Excellent holding power in weak base materials

Applications:

Ideally used in applications that requires a light, medium or heavy-duty anchor for fixing into concrete, brick or block base materials. Typically used by contractors in the construction, building and engineering trades.
Commonly used in applications which require a non expansion type fastener. Can be used in a range of applications such as internal and external residential fixings, holding down fixtures such as machinery, pumps, motors, fabrication and suspension work, railing, stairs, balconies, etc .

More Information

More Information
Product Type	ANCHORS - CHEMICAL
Custom 3 - Location Bin	O1F1-WLG2.1
Pack Qty	10
Material/ Coating	Galvanised
Screw Point	Chisel Point
Head	Ext Hex Head
Drill Size	14mm