Galvanised Hex Sleeve Anchors 10mm X 60mm - 50 pc
$27.81
In Stock
60mm
50PC
10mm QCode: 162067
SKU
SAHG10060-50
Galvanised Hex Sleeve Anchors are used to anchor into hard and lightweight solid masonry materials inluding concrete, brick and blocks. The anchor is inserted into a pre-drilled hole and when the head is turned, the end of the anchor is pulled to expand and secure itself. The Galvanised coating is suitable for most outdoor applications. Please see table below for grip range, drill size and hole depth.
| Drilling and Fixing Information for Sleve Anchor - Hex - Galvanised | |||
| Size | Drill Size (mm) | Fasten Material (mm) | Min. Hole Depth (mm) |
| 8mm X 40 | 8 | 5 | 35 |
| 8mm X 65 | 8 | 30 | 35 |
| 8mm X 85 | 8 | 50 | 35 |
| 10mm X 40 | 10 | 4 | 36 |
| 10mm X 50 | 10 | 10 | 40 |
| 10mm X 60 | 10 | 20 | 40 |
| 10mm X 77 | 10 | 35 | 40 |
| 10mm X 97 | 10 | 55 | 40 |
| 10mm X 125 | 10 | 80 | 40 |
| 12mm X 60 | 12 | 10 | 50 |
| 12mm X 75 | 12 | 25 | 50 |
| 12mm X 99 | 12 | 50 | 50 |
| 12mm X 129 | 12 | 80 | 50 |
| 16mm X 65 | 16 | 10 | 55 |
| 16mm X 111 | 16 | 55 | 55 |
| 16mm X 147 | 16 | 90 | 55 |
| 20mm X 75 | 20 | 15 | 60 |
| 20mm X 107 | 20 | 45 | 60 |
| 20mm X 151 | 20 | 90 | 60 |
| Product Type | ANCHORS - SLEEVE ANCHOR |
|---|---|
| Custom 3 - Location Bin | O1B4-WLG11.2 |
| Pack Qty | 50 |
| Material/ Coating | Galvanised |
| Length | 60mm |
| Head | Hex Head |
| Drive | Hex |
| Drill Size | 10mm |
Supplier SKUs: MTBMSGM100060-50 MTBMSGM100060 MTBMSGM100060 9314818954662 9314818954662
